300-430 ENWLSI
Implementing Cisco Enterprise Wireless (ENWLSI)

Koncentracijska obuka (izborni ispit)

Osnovne informacije

Dužina

Trajanje

  • 40 časova sa profesorom (min 1/3 praktičan rad na opremi)
  • 60 časova* bez profesora (udaljeni praktičan rad na opremi - nakon kursa)
Znanje

Šta ćete naučiti na ovom kursu?

  • Secure wireless network infrastructure
  • Troubleshoot wireless network infrastructure
  • Use Cisco Identity Service Engine (ISE)
  • Use Cisco Prime Infrastructure (PI)
  • Use Cisco Connect Mobile Experience (CMX)
Nakon kursa

Koji su benefiti

Upon completion of this course, candidates will have the skills and knowledge to:

  • Implement and secure a Cisco wireless network infrastructure
  • Use Cisco Identity Services Engine, Cisco Prime Infrastructure, and Cisco Connect Mobile Experience to monitor and troubleshoot network issues
  • Validate your knowledge and prepare to take the Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) exam
Pre kursa

Preduslovi

To fully benefit from this course, you should have the following knowledge and skills:

  • General knowledge of networks
  • General knowledge of wireless networks
  • Routing and switching knowledge

Pregled kursa

  • Securing and Troubleshooting the Wireless Network Infrastructure
  • Implementing and Troubleshooting Secure Client Connectivity
  • Implementing and Troubleshooting Quality of Service (QoS) in Wireless Networks
  • Implementing and Troubleshooting Advanced Wireless Network Services

Praktične vežbe

  • Configure Secure Management Access for Cisco Wireless LAN Controllers (WLCs) and Access Points (APs)
  • Add Network Devices and External Resources to Cisco Prime Infrastructure
  • Capture a Successful AP Authentication
  • Implement Authentication, Authorization, and Accounting (AAA) Services for Central Mode WLANs
  • Implement AAA Services for FlexConnect Mode Wireless LANs (WLANs)
  • Configure Guest Services in the Wireless Network
  • Configure Bring Your Own Device (BYOD) in the Wireless Network
  • Capture Successful Client Authentications
  • Configure QoS in the Wireless Network for Voice and Video Services
  • Configure Cisco Application Visibility and Control (AVC) in the Wireless Network
  • Capture Successful QoS Traffic Marking in the Wireless Network
  • Configure, Detect, and Locate Services on the Cisco CMX
  • Identify Wireless Clients and Security Threats

Šta očekivati na ispitu

  • 300-430 ENWLSI exam tests your knowledge of implementation and troubleshooting for advanced routing technologies and services.
  • After you pass 300-430 ENWLSI, You earn the Cisco Certified Specialist – Enterprise Wireless Implementation certification.
  • You satisfy the concentration requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, you must pass the 350-401 ENCOR exam.

300-430 ENWLSI ispitne teme

The Implementing Cisco Enterprise Wireless Networks v1.0 (ENWLSI 300-430) exam is a 90-minute exam associated with the CCNP Enterprise and Cisco Certified Specialist - Enterprise Wireless Implementation certifications. This exam certifies a candidate's knowledge of wireless network implementation including FlexConnect, QoS, Multicast, advanced location services, security for client connectivity, monitoring and device hardening. The course, Implementing Cisco Enterprise Wireless Networks, helps candidates to prepare for this exam. This exam tests your knowledge of:

1.0 FlexConnect 15%

1.1 Deploy FlexConnect components such as switching and operating modes

1.2 Deploy FlexConnect capabilities

  • 1.2.a FlexConnect groups and roaming
  • 1.2.b Split tunneling and fault tolerance
  • 1.2.c VLAN-based central switching and Flex ACL
  • 1.2.d Smart AP image upgrade

1.3 Implement Office Extend

2.0 QoS on a Wireless Network 10%

2.1 Implement QoS schemes based on requirements including wired to wireless mapping

2.2 Implement QoS for wireless clients

2.3 Implement AVC including Fastlane (only on WLC)

3.0 Multicast 10%

3.1 Implement multicast components

3.2 Describe how multicast can affect wireless networks

3.3 Implement multicast on a WLAN

3.4 Implement mDNS

3.5 Implement Multicast Direct

4.0 Location Services 10%

4.1 Deploy MSE and CMX on a wireless network

4.2 Implement location services

  • 4.2.a client tracking
  • 4.2.b RFID tags (tracking only)
  • 4.2.c Interferers
  • 4.2.d Rogue APs
  • 4.2.e Clients 
5.0 Advanced Location Sevices 10%

5.1 Implement CMX components

  • 5.1.a Detect and locate
  • 5.1.b Analytics
  • 5.1.c Presence services

5.2 Implement location-aware guest services using custom portal and Facebook Wi-Fi

5.3 Troubleshoot location accuracy using Cisco Hyperlocation

5.4 Troubleshoot CMX high availability

5.5 Implement wIPS using MSE

6.0 Security for Wireless Client Connectivity 20%

6.1 Configure client profiling on WLC and ISE

6.2 Implement BYOD and guest

  • 6.2.a CWA using ISE (including self-registration portal)
  • 6.2.b LWA using ISE or WLC
  • 6.2.c Native supplicant provisioning using ISE
  • 6.2.d Certificate provisioning on the controller

6.3 Implement 802.1X and AAA on different wireless architectures and ISE

6.4 Implement Identity-Based Networking on different wireless architectures (VLANs, QoS, ACLs)

7.0 Security for Wireless Client Connectivity 20%

6.1 Configure client profiling on WLC and ISE

6.2 Implement BYOD and guest

  • 6.2.a CWA using ISE (including self-registration portal)
  • 6.2.b LWA using ISE or WLC
  • 6.2.c Native supplicant provisioning using ISE
  • 6.2.d Certificate provisioning on the controller

6.3 Implement 802.1X and AAA on different wireless architectures and ISE

6.4 Implement Identity-Based Networking on different wireless architectures (VLANs, QoS, ACLs)

8.0 Device Hardening 10%

8.1 Implement device access controls (including RADIUS and TACACS+)

8.2 Implement access point authentication (including 802.1X)

8.3 Implement CPU ACLs on the controller

rootPlanet

  • © rootPlanet 2023

  • Najveća IT laboratorija na Balkanu

eLearning

  • eLearning

Rešenja

  • Rešenja

Kontakt